EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Show alarms, events and measurements from DSP in CS-Studio and generate files with this data
From: Carlos Gómez Martinez <[email protected]>
To: "[email protected]" <[email protected]>
Date: Fri, 11 Mar 2016 10:29:38 +0100

Hi ,

 

I am Carlos from Spain and I am developing an HMI, it consists of:

A DSP sends measurements, alarms and events through modbus addresses, these data are converted to EPICS and displayed on screen with CSS. The "brain" of the project is the DSP, ie, alarms are not made by epics, alarms are generated by the DSP and the cs-studio is only displayed if there is failure, if there is no fault, measures etc .. I would know how these failures can be collected, events and actions and how I can build a table in CS-Studio where these data to be displayed and also to generate a file with this data.

 

Thanks,

 

Carlos

Replies:
RE: Show alarms, events and measurements from DSP in CS-Studio and generate files with this data Mark Rivers
Re: Show alarms, events and measurements from DSP in CS-Studio and generate files with this data Kasemir, Kay
Navigate by Date:
Prev: Re: appropriate version of sequnecer Ralph Lange
Next: RE: Show alarms, events and measurements from DSP in CS-Studio and generate files with this data Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: appropriate version of sequnecer jun-ichi.odagiri
Next: RE: Show alarms, events and measurements from DSP in CS-Studio and generate files with this data Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 15 Jul 2016 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·