Experimental Physics and
Industrial Control System

You can refer to some simple examples, such as https://github.com/epicsdeb/elegant.
The configuration is controlled by the install file under debian directory like Martin mentioned.

Thanks,

Guobao

On 2/21/16 11:28 PM, Konrad, Martin wrote:

Hi Lin,

my problem is that the configure/RELEASE file will be the
"/usr/lib/epics/configure/RELEASE" file in the package as well, which
  conflicts with the existing one of EPICS base and causes failure
when install the Debian package.

You probably do not want to install the RELEASE file of your IOC along
with your binaries. Exclude it from the list of files to be installed
(e.g. remove it from debian/<package-name>.install) and you should be good.

HTH,

Martin

Navigate by Date:

Prev: RE: Asyn installation on Raspberry Pi 2 Mark Rivers

Next: Re: referencing libraries Andrew Johnson

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Problem when building debian package IOC Wang, Lin

Next: Motor examples missing devSequencer Gerrit Kühn

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024