Hi Stefen,
On 01/13/2016 06:41 AM, Stefen Paul wrote:
> Is it true that VxWorks 6.9 BSP can't make use of VME64 or VME64x
> addressing capabilities even if the SBC on which it is running has this
> feature ?
>
> Because in config.h I can see only A16, A24 and A32 address space details.
That depends on the BSP (you didn't tell us which board/BSP you're
using), but you could be right. Over the 15 years I've been maintaining
BSPs for the APS I have added many features to our BSPs which did not
come with the originals from Wind River. I have made several of those
changes available to the EPICS community through tech-talk, which you
can find by searching the archives, but please note that I can't publish
the full BSP code because the original BSPs are proprietary software,
not Open Source.
If you explain what you're looking for in a bit more detail there are
several people on this list who might be able to help.
- Andrew
--
There are only two hard problems in distributed systems:
2. Exactly-once delivery
1. Guaranteed order of messages
2. Exactly-once delivery
-- Mathias Verraes
- Replies:
- Re: VxWorks 6.9 Stefen Paul
- References:
- VxWorks 6.9 Stefen Paul
- Navigate by Date:
- Prev:
RE: RGA MKS Microvision 2 david.hickin
- Next:
RE: RGA MKS Microvision 2 rory.clarke
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
VxWorks 6.9 Stefen Paul
- Next:
Re: VxWorks 6.9 Stefen Paul
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
|