Experimental Physics and
Industrial Control System

김지화(빔라인장치팀) <[email protected]> · Tue, 5 Jan 2016 21:56:06 +0000

Hi Martin,

We are using CentOS 6.5 linux and ioc code from the https://github.com/epics-modules/mrfioc2/
and ver 2.4 from the https://github.com/epics-modules/devlib2 

Thanks,

Ji-Hwa
________________________________________
보낸 사람: [email protected] <[email protected]> 대신 Konrad, Martin <[email protected]>
보낸 날짜: 2016년 1월 6일 수요일 오전 6:26
받는 사람: [email protected]
제목: Re: mrfioc2 loading error at vxWorks 6.9

Hi Ji-Hwa,
Are you building from the tarballs or are you using the Debian packages?
Which version of devlib2 are you using?

-Martin

On 01/05/2016 03:59 PM, 김지화(빔라인장치팀) wrote:
> Hello All,
> Recently when I test a MRF event board, I found a VxWorks “mrf.munch”
> loading errors with MVME6100 VME board.
> Used packages:
> epics Base 3.15.3
> mrfioc 2.0.4
> devlib2
> VxWorks 6.9
> Workbench 3.3
> -> ld < mrf.munch
> Warning: module 0x4353af0 holds reference to undefined symbol
> _Z13sysPciOutLongPjj.
> Warning: module 0x4353af0 holds reference to undefined symbol
> _Z13sysPciOutWordPtt.
> Warning: module 0x4353af0 holds reference to undefined symbol
> _Z12sysPciInWordPt.
> Warning: module 0x4353af0 holds reference to undefined symbol
> _Z12sysPciInLongPj.
> Warning: module 0x4353af0 holds reference to undefined symbol
> _Z12sysPciInBytePh.
> Warning: module 0x4353af0 holds reference to undefined symbol
> _Z13sysPciOutBytePhh.
> ld(): module contains undefined symbol(s) and may be unusable.
> Please give any suggestions and comments.
> Thanks,
> Ji-Hwa Kim
> PAL-XFEL Project
> Pohang Accelerator Laboratory
> 80 Jigokro-127-Beongil, Nam-gu, Pohang, Gyeongbuk
> 37673, Korea

--
Martin Konrad
Control System Engineer
Facility for Rare Isotope Beams
Michigan State University
640 South Shaw Lane
East Lansing, MI 48824-1321, USA
Tel. 517-908-7253
Email: [email protected]

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System