Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
<== Date ==> <== Thread ==>

Subject: RE: mid-speed digitizer options?
From: Mazanec Tomáš <Tomas.Mazanec@eli-beams.eu>
To: Michael Davidsaver <mdavidsaver@gmail.com>, EPICS Tech-Talk <tech-talk@aps.anl.gov>
Cc: "Cogan, Scott" <cogan@frib.msu.edu>, "Rodriguez, Pedro" <rodrigup@frib.msu.edu>
Date: Tue, 27 Oct 2015 08:49:34 +0000
Hi Michael,

We evaluated couple of options some time ago:
1. Thumbs up for Hytec -- there are for example DIN-rail mountable IOC and PCIe mezzanine, both with a selection of IP modules. IP modules come with EPICS driver (AsynPortDriver-based, some freely downloadable from Hytec's website)

2. DNA-Box (and perhaps some other) products of United Electronics Industries come with full EPICS support and source-codes. 

3. Since we have plenty of National Instruments HW around here, another two ideas where to look:
 -- On EPICS 2014 meeting, there was presentation of RIO-family of products support for EPICS:
"Methodology for development of intelligent Data and Image Acquisition systems using EPICS and FlexRIO technology (presentations/Thursday/Dsanz_EPICS-FlexRIO-UPM_EPICS_2014.pdf)"
It supposed to be a development for ITER, I think. The guy who presented was interested in collaboration, testing, etc..
 -- There is an ongoing development of EPICS drivers for NI stuff in CODAC system (high-speed PXIe cards, last time I've checked)

Regardless the options, I'm curious what is going to be your choice at the end ?

Cheers,
Tomas


________________________________________
Od: tech-talk-bounces@aps.anl.gov [tech-talk-bounces@aps.anl.gov] za uživatele Michael Davidsaver [mdavidsaver@gmail.com]
Odesláno: 15. října 2015 0:30
Komu: EPICS Tech-Talk
Kopie: Cogan, Scott; Rodriguez, Pedro
Předmět: mid-speed digitizer options?

All,

I've been asked for advise on finding a digitizer for a fast thermometry
application (RTDs).  The desire is for a sampling range in the range of
50-100 KSPS with 16-bit resolution over +-10 V.  There will be ~200
channels in total, so I think a high density solution would be
appropriate.  Pre-existing epics support is of course a plus.

The first solution to come to my mind is industry pack.  Something like
the hytec IP-VAD-8418.

What options are available for this "middle" speed range?

Thanks,
Michael



Replies:
Re: mid-speed digitizer options? Ralph Lange
References:
mid-speed digitizer options? Michael Davidsaver

Navigate by Date:
Prev: RE: mid-speed digitizer options? Mazanec Tomáš
Next: RE: mid-speed digitizer options? tom.cobb
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
Navigate by Thread:
Prev: RE: mid-speed digitizer options? Mazanec Tomáš
Next: Re: mid-speed digitizer options? Ralph Lange
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
ANJ, 16 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·