Experimental Physics and Industrial Control System
Thanks for sharing, Till.
I've googled that. Is it part of SPEAR and so the SW platform is actually EPICS/RTEMS running on VME ?
Regards,
Tomas
________________________________________
Od: [email protected] [[email protected]] za uživatele Till Straumann [[email protected]]
Odesláno: 15. října 2015 2:01
Komu: Michael Davidsaver; EPICS Tech-Talk
Kopie: Cogan, Scott; Rodriguez, Pedro
Předmět: Re: mid-speed digitizer options?
I have used a PMC board by general standards. 64 parallel channels
(i.e., no mux).
www.generalstandards.com
- Till
On 10/14/2015 05:30 PM, Michael Davidsaver wrote:
> All,
>
> I've been asked for advise on finding a digitizer for a fast thermometry
> application (RTDs). The desire is for a sampling range in the range of
> 50-100 KSPS with 16-bit resolution over +-10 V. There will be ~200
> channels in total, so I think a high density solution would be
> appropriate. Pre-existing epics support is of course a plus.
>
> The first solution to come to my mind is industry pack. Something like
> the hytec IP-VAD-8418.
>
> What options are available for this "middle" speed range?
>
> Thanks,
> Michael
>
- References:
- mid-speed digitizer options? Michael Davidsaver
- Re: mid-speed digitizer options? Till Straumann
- Navigate by Date:
- Prev:
RE: theimagingsource cameras? Mazanec Tomáš
- Next:
RE: mid-speed digitizer options? Mazanec Tomáš
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: mid-speed digitizer options? Till Straumann
- Next:
RE: mid-speed digitizer options? Mazanec Tomáš
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024