1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | EPICS S7plc driver & TIA Portal |
From: | Remi Faure <[email protected]> |
To: | [email protected] |
Date: | Fri, 16 Oct 2015 15:01:13 +0200 |
Hello,I have to send datas from siemens S7-300 PLC to EPICS S7plc driver via a TCP connection. The Siemens software used to configure the plc is TIA portal V13 SP1. The documentation "EPICS using SLS s7plc driver" is written with the previous version, Simatic manager example and my tries show me that the procedure is a bit different.
Does anyone have experience in programming S7-300 plc's with TIA PORTAL in the same goal? Ideally an example program?
Is it possible that TIA Portal configuration could be an issue for the EPICS S7plc driver?
I would also like to know if the documentation "EPICS using SLS s7plc driver" will be upgraded to explain the procedure with the new siemens TIA Portal Software?
Thank you in advance yours sincerely Remi FAURE Engineer Assistant at LPSC Grenoble-CNRS