Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
<== Date ==> <== Thread ==>

Subject: Re: mid-speed digitizer options?
From: Till Straumann <strauman@slac.stanford.edu>
To: Michael Davidsaver <mdavidsaver@gmail.com>, EPICS Tech-Talk <tech-talk@aps.anl.gov>
Cc: "Cogan, Scott" <cogan@frib.msu.edu>, "Rodriguez, Pedro" <rodrigup@frib.msu.edu>
Date: Wed, 14 Oct 2015 19:01:44 -0500
I have used a PMC board by general standards. 64 parallel channels (i.e., no mux).

www.generalstandards.com

- Till

On 10/14/2015 05:30 PM, Michael Davidsaver wrote:
All,

I've been asked for advise on finding a digitizer for a fast thermometry
application (RTDs).  The desire is for a sampling range in the range of
50-100 KSPS with 16-bit resolution over +-10 V.  There will be ~200
channels in total, so I think a high density solution would be
appropriate.  Pre-existing epics support is of course a plus.

The first solution to come to my mind is industry pack.  Something like
the hytec IP-VAD-8418.

What options are available for this "middle" speed range?

Thanks,
Michael



Replies:
RE: mid-speed digitizer options? Mazanec Tomáš
References:
mid-speed digitizer options? Michael Davidsaver

Navigate by Date:
Prev: RE: mid-speed digitizer options? Mark Rivers
Next: Modbus Binary Output Readbacks Wallace, Alex
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
Navigate by Thread:
Prev: RE: mid-speed digitizer options? Mark Rivers
Next: RE: mid-speed digitizer options? Mazanec Tomáš
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
ANJ, 16 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·