Hi, everyone:
My environment: SL 6.0, epics 3.14.12.1, synApps 5.6
I have a strang question about controling a counter(974) with synApp5.6.
I successfully used it before. Now,I failed control it, even I failed control it with Labview(windows program).
Some more information:I do nothing except connecting a signal generator to 974, when I disconnected the signal generator, it failed in control.
**********************************
Following is part of the st.cmd.( I think it is the information)
####
drvAsynSerialPortConfigure("serial_974","/dev/ttyS0",3,0,0)
asynSetOption("serial_974",0,"baud","9600")
asynSetOption("serial_974",0,"bits","8")
asynSetOption("serial_974",0,"parity","none")
asynSetOption("serial_974",0,"stop","2")
#asynSetOption("serial_974",0,"clocal","Y")
#asynSetOption("serial_974",0,"crtscts","N")
asynOctetSetInputEos("serial_974",0,"\r\n")
asynOctetSetOutputEos("serial_974",0,"\r\n")
asynSetTraceIOMask("serial_974",0,0x2)
asynSetTraceMask("serial_974",0,0x9)
asynOctetConnect("serial_974","serial_974")
asynOctetWriteRead("serial_974","INIT")
2015/10/12 22:01:57.625 /dev/ttyS0 write 6
INIT\r\n
2015/10/12 22:01:58.725 Error in WriteRead, nout 4 ninp=0 error
###################### setup 974 #############################
initScaler974("serial974","serial_974",0,100)
########################################################
thanks for your help,
Liang
- Replies:
- RE: why failed without changes Mark Rivers
- Navigate by Date:
- Prev:
Re: how to make AXIS 214 PTZ network camera into EPICS and CSS Mark Engbretson
- Next:
RE: why failed without changes Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: how to make AXIS 214 PTZ network camera into EPICS and CSS Kevin Peterson
- Next:
RE: why failed without changes Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|