1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Area Detector: ADPointGrey 2-1 and Blackfly GIGE on Linux |
From: | John Dobbins <[email protected]> |
To: | "[email protected]" <[email protected]> |
Date: | Tue, 6 Oct 2015 20:40:59 +0000 |
All,
I find I cannot run Area Detector for two Point Grey Blackfly GIGE cameras on Linux at the same time. The error (image consistency) appears to come from the Point Grey driver. It works as long as only one camera is acquiring images.
I am using ADPointGrey 2-1 and see that it includes libflycapture.so.2.7.3.13.
( EPICS 3.14.12.5 on Scientific Linux 7, a 3.10 kernel)
I contacted Point Grey and found that they had withdrawn the Flycap 2.7 SDK for Linux. In their words:
""There was an issue with our 2.7 release of FlyCapture SDK prevented customers
from streaming from multiple GigE cameras at the same time." So before I sink much more time into this I was wondering if anyone has experience running multiple Blackfly GIGE cameras on Linux? On Windows?
Regards,
John Dobbins
Cornell University Laboratory for Accelerator Based ScienceS and Education
www.classe.cornell.edu
|