EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
<== Date ==> <== Thread ==>

Subject: RE: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2
From: "Madden, Timothy J." <tmadden@aps.anl.gov>
To: "Rivers, Mark L." <rivers@cars.uchicago.edu>
Cc: "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Fri, 2 Oct 2015 22:15:20 +0000
Mark

Thanks for the reply.

Here is the error message. I saw someone else had gotten a similar message. With other epics base it goes away, but the 2015 compiler does not work with older EPICS.

Tim
See below-----------------------------------------------


D:\EPICS\ADEpics\synApps_5_5\support\seq-2.2.3>make
cygwin warning:
  MS-DOS style path detected: D:/EPICS/ADEpics/base-3.15.2/configure/CONFIG
  Preferred POSIX equivalent is: /cygdrive/d/EPICS/ADEpics/base-3.15.2/configure
/CONFIG
  CYGWIN environment variable option "nodosfilewarning" turns off this warning.
  Consult the user's guide for more details about POSIX paths:
    http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
make -C ./configure install
make[1]: Entering directory `/cygdrive/d/EPICS/ADEpics/synApps_5_5/support/seq-2
.2.3/configure'
perl -CSD /cygdrive/d/EPICS/ADEpics/synApps_5_5/support/seq-2.2.3/configure/D:/E
PICS/ADEpics/base-3.15.2/bin/windows-x64-debug/makeMakefile.pl O.windows-x64-deb
ug ../..
Can't open perl script "/cygdrive/d/EPICS/ADEpics/synApps_5_5/support/seq-2.2.3/
configure/D:/EPICS/ADEpics/base-3.15.2/bin/windows-x64-debug/makeMakefile.pl": N
o such file or directory
make[1]: *** [O.windows-x64-debug] Error 2
make[1]: Leaving directory `/cygdrive/d/EPICS/ADEpics/synApps_5_5/support/seq-2.
2.3/configure'
make: *** [configure.install] Error 2

D:\EPICS\ADEpics\synApps_5_5\support\seq-2.2.3>

-----------------------------------------------END------------------------------------------------






________________________________________
From: Mark Rivers [rivers@cars.uchicago.edu]
Sent: Friday, October 02, 2015 4:50 PM
To: Madden, Timothy J.
Cc: tech-talk@aps.anl.gov
Subject: Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2

2.2.3 does work for me with VS 2010 and 3.14.12.5. It was 2.2.2 that did not work. I have not tested your combination of compiler and base, but please send the error message.

Mark


Sent from my iPhone

On Oct 2, 2015, at 4:20 PM, Madden, Timothy J. <tmadden@aps.anl.gov<mailto:tmadden@aps.anl.gov>> wrote:

Dear EPICS:

Trying to build seq 2.2.3 with epics base 3.15.2. I am using the windows 2015 compiler on a 64 bit machine.
I am building in 64 bit mode.

I saw some tech talk notes that this does not work?

Mark R. says one can make this work with 2.2.x snapshot etc. etc. I don't know where to get this. it is not on the seq web site.

Thanks
Tim Madden
APS



Replies:
Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Mark Rivers
References:
Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Madden, Timothy J.
Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Mark Rivers

Navigate by Date:
Prev: RE: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Madden, Timothy J.
Next: Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Ben Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017 
Navigate by Thread:
Prev: Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Mark Rivers
Next: Re: Building SEQ 2.2.3, Windows, EPICS Base 3-15-2 Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017