Dear Andrew,
On Thu, Jul 30, 2015 at 05:26:57PM -0500, Andrew Johnson wrote:
> dbLoadRecords("gf100.db","PORT=L0,ADDR=0,MAC=\\x24")
This is the correct syntax.
Thanks,
Michael
--
Dr. Michael Ritzert Tel: +49 621 181 2883
Schaltungstechnik und Simulation Fax: +49 621 181 2734
Technische Informatik, Uni Heidelberg [email protected]
68131 Mannheim, Germany http://sus.ziti.uni-heidelberg.de
- References:
- Passing a raw byte value from st.cmd to a StreamDevice proto file Michael Ritzert
- Re: Passing a raw byte value from st.cmd to a StreamDevice proto file Andrew Johnson
- Navigate by Date:
- Prev:
Re: Passing a raw byte value from st.cmd to a StreamDevice proto file Andrew Johnson
- Next:
EPICS Services bob dalesio
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Passing a raw byte value from st.cmd to a StreamDevice proto file Andrew Johnson
- Next:
Problem with CSS alarm notifier 龙巍
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|