I assume you need to send a slightly different string for the other LED. You could have 2 stringout records, each with a different string. An seq record processing every 2 seconds could first process stringout 1, then wait 1 second, and then process stringout 2.
Mark
Sent from my iPhone
On Jul 30, 2015, at 1:02 PM, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> wrote:
Hello,
I work with a special driver card and I can turn on/off the LEDs with the command caput myproject:1streamDEBUG "RGWR 0xIIII px01l
I have only C++ experience so how can I create a loop like for or while loop to toggle between two LEDs automatically every second?
Thanks,
Mike T.
- References:
- Epics records and loops info22
- Navigate by Date:
- Prev:
Epics records and loops info22
- Next:
Jeorger enterprises graham waters
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Epics records and loops info22
- Next:
Jeorger enterprises graham waters
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·