I have built the previous version (3-10). It needed some fixes to work on Windows. I sent them to GMCA but I don't know if they have been incorporated yet.
Mark
Sent from my iPhone
> On Jul 9, 2015, at 3:22 PM, Kevin Peterson <[email protected]> wrote:
>
> Has anyone successfully compiled the latest version of tpmac (tpmac3-11
> from http://www.gmca.aps.anl.gov/TPMAC2/ or tpmac-3-11dls5 from
> http://controls.diamond.ac.uk/downloads/support/tpmac/) on Windows? If
> so, I have more questions:
>
> 1. Which toolchain (visual studio, cygwin, mingw, other) was used?
>
> 2. What is the Windows version?
>
> 3. Which versions of the required modules (EPICS base, asyn, motor,
> busy) were used?
>
> Thanks,
>
> Kevin
>
> --
> Kevin M. Peterson
> (630) 252-8644
> [email protected]
- References:
- building tpmac on Windows Kevin Peterson
- Navigate by Date:
- Prev:
building tpmac on Windows Kevin Peterson
- Next:
Re: EPICS base-3.14.12.5 installation error Alex George
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
building tpmac on Windows Kevin Peterson
- Next:
Driver for ADAM 4017 D2E John . Holt
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|