Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

hi,

when I creat a testApp and a soft waveform record as following:

record(waveform, "twf")
{
  field(SCAN, "Passive")
  field(NELM, "40")
  field(FTVL, "SHORT")
}

if I use caput to write the value to the PV like this:

caput twf 1 2 3 4 5

Old : twf 40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

New : twf 40 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

seems the array wasn't written to the PV, why?

Thanks a lot in advance.

Best wishes

Geyang 2015-07-08

Navigate by Date:: Prev: Job Opening at the Australian Synchrotron Paul Martin; Next: RE: waveform record freddie.akeroyd; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Job Opening at the Australian Synchrotron Paul Martin; Next: RE: waveform record freddie.akeroyd; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 16 Dec 2015