Experimental Physics and
Industrial Control System

"Williams Jr., Ernest L." <[email protected]> · Thu, 21 May 2015 18:34:07 +0000


Sent from my iPhone

> On May 21, 2015, at 10:32 AM, Mark Rivers <[email protected]> wrote:
> 
> Hi Ernest,
> 
> I don't think it is really and either/or question with devlib2 and asyn.  At least for the drivers I've seen they work together.  For example I've written an asyn driver for the SIS3820, but it would be nice to have devlib2 functions to do OS-independent DMA with it.  So asyn drivers make calls to devlib2 functions for OS-independent access to the VME or PCI bus.
What about endianness ?
That would be also nice

> 
> How does devlib2 get involved with Ethernet/RS-232 based devices?
Not all, as far as I know

But I think Michael Davidsaver or Till will chime in here :-)

Cheers
Ernest

> 
> Mark
> 
> ________________________________________
> From: [email protected] [[email protected]] on behalf of Williams Jr., Ernest L. [[email protected]]
> Sent: Thursday, May 21, 2015 9:26 AM
> To: [email protected]
> Subject: devlib2 and  asyn  Pros/Cons
> 
> Hi everyone,
> 
> We would like to go down a path of standardizing new EPICS drivers that we develop here at SLAC.
> 
> 
> Can folks speak about pros/cons for using devlib2-based approach  versus an asyn-based approach for access
> to (1) PCI bus access, VME64x CSR/CSR, and other memory-mapped devices; (2) ethernet/RS232 based; stream-based ?
> 
> 
> Here at SLAC we have a module that Till wrote which addresses:
> (1) memory and I/O barriers, (2) endianess
> Is this something that belongs in or is now in EPICS BASE?
> 
> 
> 
> Cheers,
> Ernest

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System