Experimental Physics and
Industrial Control System

Hi everyone,

We would like to go down a path of standardizing new EPICS drivers that we develop here at SLAC.


Can folks speak about pros/cons for using devlib2-based approach  versus an asyn-based approach for access
to (1) PCI bus access, VME64x CSR/CSR, and other memory-mapped devices; (2) ethernet/RS232 based; stream-based ?


Here at SLAC we have a module that Till wrote which addresses:
(1) memory and I/O barriers, (2) endianess
Is this something that belongs in or is now in EPICS BASE?



Cheers,
Ernest

Replies:

RE: devlib2 and asyn Pros/Cons Mark Rivers

Navigate by Date:

Prev: EPICS Alarm system via web browser Jiro Fujita

Next: RE: EPICS Alarm system via web browser Bertrand Alain Gregor (PSI)

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: EPICS Alarm system via web browser Kasemir, Kay

Next: RE: devlib2 and asyn Pros/Cons Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024