Experimental Physics and
Industrial Control System

I wrote something for a Tektronix oscilloscope. If the protocol is similar you can use it as a starting point.

https://github.com/brunoseivam/tekScope

Bruno

On Wed, May 20, 2015 at 6:29 AM, Ibrahim Saleh <[email protected]> wrote:

Dear All,

Has anyone developed an EPICS support for Tektronix AFG3000C?

Regards,


Ibrahim Saleh
Control Engineer
SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East)  
P.O. Box 7, Allan 19252, Jordan
Tel: (+962-5) 3511348 , ext. 242
Fax: (+962-5) 3511423
Mob: (+962-7)95677333
www.sesame.org.jo
[email protected]

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Tang, Johnny Y.
Sent: Monday, April 01, 2013 8:01 PM
To: [email protected]
Subject: EPICS device driver support for Tektronix AFG3000C

We are considering to develop EPICS support for Tektronix AFG3000 for SNS Ion Source Control System.
Please let me know if you have already developed the driver for it or similar.
Thank you.

Johnny Tang
--
Control Group
Spallation Neutron Source
Oak Ridge National Laboratory
(865) 382-0315
[email protected]

-- 
Niklas Claesson
Integrator
Integrated Control System Division

European Spallation Source (ESS)
P.O Box 176, SE-221 00 Lund, Sweden
Visiting address: ESS, Tunavägen 24, Lund, Sweden