Experimental Physics and
Industrial Control System

Mark Rivers <[email protected]> · Sat, 18 Apr 2015 23:05:54 +0000

Folks,

There are new releases of the areaDetector modules ADPerkinElmer, ADRoper, ADURL, ADmar345, and ADmarCCD.

All modules have been updated to be compatible with ADCore R2-2.  They also all have updated autoconverted OPI screens for CSS-BOY, caQtDM, and edm, thanks to Tim Mooney.

The releases and any additional release notes are:

ADPerkinElmer:
R2-2 (17-April-2015)
- Added PEOffsetConstant. 
  This is a user-specified value that is added to each pixel when offset correction is done. 
  It adds a pedestal to the data, ensuring that offset correction does not result in negative values, which are then clipped to 0. 
  Values of 100-200 should be sufficient to prevent negative data during offset correction.
- Updated to version 3-3-2-3 of the XIS SDK.
- Bug fix: The driver was not changing the gain when the PEGain record was processed.
- Bug fix: If the binning was changed while offset correction was enabled, and without collecting a new offset image, it could crash the IOC. 
  Now if the binning is changed the offset correction is set to Unavailable until a new offset image is collected.

ADRoper
R2-1 (18-April-2015)

ADURL
R2-1 (18-April-2015)

ADmar345
R2-1 (18-April-2015)

ADmarCCD
R2-1 (18-April-2015)
- Fixed problems stopping acquisition in normal and double-correlation modes.

The new releases can be found on github: https://github.com/areaDetector

Please let me know of any problems.

Mark

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System