EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: areaDetector to control Pilatus
From: <[email protected]>
To: <[email protected]>, <[email protected]>
Date: Thu, 19 Mar 2015 09:30:48 +0000
At Diamond this is exactly the set-up we have on several beamlines.

Our detector severs are as delivered from Dectris, except that we add procserv to automatically start up camserver.

The areaDetector IOC runs on the PPU and communicates with camserver on TCP port 41234. Your dectris server connection would typically have the IP address 10.10.10.100 so the following IOC startup script entries would initialize and connect the driver to camserver.


drvAsynIPPortConfigure("pilatus1.CAMip", "10.10.10.100:41234", 100, 0, 0)
asynOctetSetInputEos("pilatus1.CAMip", 0, "\030")
asynOctetSetOutputEos("pilatus1.CAMip", 0, "\n")

# pilatusDetectorConfig(portName, serverPort, maxSizeX, maxSizeY, maxBuffers, maxMemory)
pilatusDetectorConfig("pilatus1.CAM", "pilatus1.CAMip", 487, 195, 150, 0)


________________________________________
From: [email protected] [[email protected]] on behalf of GONG Yu [[email protected]]
Sent: 19 March 2015 09:04
To: EPICS_tech_talk
Subject: areaDetector to control Pilatus

Hello everyone,
    I am planning to use areDetector to control the Pilatus Detector. For Pilatus, there are 2 computers, one computer is detector server which is directly connected to Pilatus detector, and another computer is called PPU connected to the detector server. The detector server has the program Camserver, which provides interface to EPICS. I have some questions:
    Is it possible to install the EPICS & areaDetector only in the PPU to connect to the Camserver in the detector server? If it is possible, what commands should I issue to connect the EPICS & areaDetector to Camserver?
Thank you

GongYu

-- 
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom



References:
areaDetector to control Pilatus GONG Yu

Navigate by Date:
Prev: areaDetector to control Pilatus GONG Yu
Next: Re: pyepics not updating pv.enum_strs after connection Matt Newville
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: areaDetector to control Pilatus GONG Yu
Next: mbbi Undefined value/string Alex Wallace
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <20152016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 16 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·