Hi, Tim:
For now what you wrote is fine. I.e. basically I want a Red-R alarm state (in the alarm handler) when; beam_state=='At Injection' while $(DEVICE):State=='ON'. I will expand on what you have provided.
Thanks, Chanaka.
On Mar 2, 2015, at 3:36 PM, Mooney, Tim M. wrote:
> Hi Chanaka,
>
> I'm not questioning your choice of an scalcout record. I'm just asking what you want the record to do. For example, what alarm should result from beam_state=='At Injection' while $(DEVICE):State=='ON', and so on.
- References:
- Using sCalcout record Chanaka De Silva
- RE: Using sCalcout record Mooney, Tim M.
- Re: Using sCalcout record Chanaka De Silva
- RE: Using sCalcout record Mooney, Tim M.
- Navigate by Date:
- Prev:
RE: Using sCalcout record Mooney, Tim M.
- Next:
Re: asyn R4.26 Zenon Szalata
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Using sCalcout record Mooney, Tim M.
- Next:
Experience with Nutaq devices Greg Tchilinguirian
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|