Experimental Physics and
Industrial Control System

I have a 'subarray' record that extracts 1 item from a 48-channel waveform record.
My example below shows I'm extracting the 3rd value.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
record(subArray,    "$(dev):halo_1_top")
 {
       field(INP,   "bbdev1:xcur")       ## input my 48-channel waveform array
       field(DTYP,  "Soft Channel")
       field(NELM,  "1")                 ## extract 1 channel only
       field(MALM,  "48")
       field(INDX,  "2")                 ## index to extract
       field(FTVL,  "FLOAT")
       field(SCAN,  ".1 second")
  }
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Now CSS (Windows 7-64bit, CSS 4.0) displays the correct value at index 0 but all other values (47 values) as well.
If I do a simple 'caget bbdev1:halo_1_top' is retuns only the extracted value correctly.

As I'm using CSS for all our new developments and we're using a lot of subarrays, it poses a problem.
Any assistance would be appreciated.
Amien
Cape Town