Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	synApps_5_7 build error (sscanSupport.dbd)
From:	"Specht, Eliot D." <[email protected]>
To:	"[email protected]" <[email protected]>
Date:	Sun, 22 Feb 2015 14:43:28 +0000

I’m having problems with a simple epics installation on a linux (RHEL7) x86_64 computer. I built base-3.15.1. In synApps_5_7/support I ran

make release

make clean

make

The build fails with the error:

make[4]: Entering directory `/opt/epics/synApps_5_7/support/sscan-2-9/sscanApp/src/O.linux-x86_64'

make[4]: *** No rule to make target `sscanSupport.dbd', needed by `../../../dbd/sscanSupport.dbd'. Stop.

make[4]: Leaving directory `/opt/epics/synApps_5_7/support/sscan-2-9/sscanApp/src/O.linux-x86_64'

Is synApps_5_7 compatible with base-3.15.1?

Eliot Specht Voice: (865)574-7682

Oak Ridge National Laboratory FAX: (865)574-4913

P.O. Box 2008, MS 6064

Oak Ridge, TN 37831-6064

Replies:: RE: synApps_5_7 build error (sscanSupport.dbd) Mooney, Tim M.

Navigate by Date:: Prev: Re: 3.15.1 documentation... Andrew Johnson; Next: RE: synApps_5_7 build error (sscanSupport.dbd) Mooney, Tim M.; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: RE: Vacuum GUI: Vac. Status and Pumping Procedural Aid Mark Rivers; Next: RE: synApps_5_7 build error (sscanSupport.dbd) Mooney, Tim M.; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 <2015> 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 16 Dec 2015