Experimental Physics and
Industrial Control System

Oops, I neglected to mention the other lines that must be in the .sav file.  (Don't include
---begin myData.sav--- or ---end myData.sav---)

---begin myData.sav---
# save/restore R5.0	Automatically generated - DO NOT MODIFY - 060720-154526
myWaveformPV @array@ { "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" }
<END>

---end myData.sav---

Tim Mooney ([email protected]) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab


________________________________________
From: [email protected] [[email protected]] on behalf of Mooney, Tim M. [[email protected]]
Sent: Monday, January 19, 2015 3:37 PM
To: Henrique Almeida; [email protected] Talk
Subject: RE: Waveform initialization

If you have autosave, you can tell it to write data from a .sav file to the waveform record.

Here's what the .sav file might look like for an 10-element array:

    myWaveformPV @array@ { "1" "2" "3" "4" "5" "6" "7" "8" "9" "10" }

Here's the command that tells autosave to use the .sav file, which I'll call "myData.sav".
Put it in your st.cmd file before the iocInit command

    set_pass1_restoreFile("myData.sav")

Tim Mooney ([email protected]) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab


________________________________________
From: [email protected] [[email protected]] on behalf of Henrique Almeida [[email protected]]
Sent: Monday, January 19, 2015 1:29 PM
To: [email protected] Talk
Subject: Waveform initialization

 Hello, how can I initialize a waveform record with data ? I need to
initialize it before a sequencer starts (it is a temperature
controller PID program table).

References:

Waveform initialization Henrique Almeida

RE: Waveform initialization Mooney, Tim M.

Navigate by Date:

Prev: RE: Waveform initialization Mooney, Tim M.

Next: Re: sequencer release 2.1.18 Benjamin Franksen

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: Waveform initialization Mooney, Tim M.

Next: new MVME5500, device "gei0" not found tlauritsen

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  <2015>  2016  2017  2018  2019  2020  2021  2022  2023  2024