Hi,
Has anyone had experience with RS232 or Ethernet industrial type 1-D barcode readers? We may need to integrate one into an Epics controlled sample changer system, that will use laser etched 1-D barcodes on aluminum sample holders. So I'm thinking an industrial one with an ASCII command/response interface would be a good way to go.
For example, this one:
http://www.datalogic.com/eng/products/industrial-automation/fixed-industrial-barcode-readers/ds4800-pd-352.html
or:
http://www.microscan.com/en-us/Products/Laser-Barcode-Scanners/QX-830-Industrial-Barcode-Scanner.aspx
Cheers,
Matt
Data Acquisition and Control Engineer
Spallation Neutron Source
Oak Ridge National Lab
- Replies:
- RE: industrial barcode reader Russ Berg
- Navigate by Date:
- Prev:
Alarm annunciation with ALH and other PC based systems Rod Nussbaumer
- Next:
RE: Alarm annunciation with ALH and other PC based systems Munro Jr, John K.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Alarm annunciation with ALH and other PC based systems Elder Matias
- Next:
RE: industrial barcode reader Russ Berg
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·