Hi,
we are developing support for PCIe EVR-300e, first release should be ready soon (it just needs testing). Device support is based on mrfioc2 [1], that we extend to add support for PCIe EVR-300e as well as cPCI based EVGs. If you don't feel like waiting for official release let me know and we can send you the pre-release (untested) code.
Note that the release that we are preparing is basically a continuation of mrfioc2 project by M. Davidsaver, and hopefully, at some point, all of the device support will be merged back into vanilla mrfioc2 branch.
Best regards,
Tom
[1] http://epics.sourceforge.net/mrfioc2/
───────────────────────┐ ┌─┐ ┌─┐ ┌─┐ ┌───────────────────────
└─┘ └─┘ └─┘ └─┘
Tom SLEJKO, Senior Control system engineer
Email: [email protected]
http://www.cosylab.com Phone: +386 (40) 349-082
Teslova ulica 30
Skype: tomslejko
──┐ ┌─┐ ┌─┐ ┌─┐ ┌───────────────────────────┐ ┌─┐ ┌─┐ ┌─┐ ┌──
└─┘ └─┘ └─┘ └─┘ └─┘ └─┘ └─┘ └─┘
----- Original Message -----
From: "Shifu Xu" <[email protected]>
To: [email protected]
Sent: Monday, 12 January, 2015 6:42:04 PM
Subject: Looking for MRF PCIE-EVR-300 driver on linux
Hello,
I am trying to use the event receiver board PCIE-EVR-300 from MRF.
Does anybody have the driver on linux platform?
Thanks,
Shifu
- References:
- Looking for MRF PCIE-EVR-300 driver on linux Xu, Shifu
- Navigate by Date:
- Prev:
RE: Looking for MRF PCIE-EVR-300 driver on linux Mark S. Engbretson
- Next:
EPICS motor module R6-9 Ron Sluiter
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Looking for MRF PCIE-EVR-300 driver on linux Mark S. Engbretson
- Next:
EPICS motor module R6-9 Ron Sluiter
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|