"L. C. De Silva" <[email protected]> writes:
> The current VI application runs on LabView8.2. Therefore I downloaded
> CaLab version 1.2.1.5 and tried installing it to get the following
> errors.
>
You did not provide much information about your setup, for example if it
is a 32-bit or 64-bit environment. I doubt there is 64-bit version of
LabView 8.2, and 'long unsigned int' hints towards 64-bits.
Your compiler and compiled EPICS libraries should probably be 32-bit ones.
Jani Hakala
- References:
- Installing CaLab "V.1.2.1.5" on SL6.1 L. C. De Silva
- Navigate by Date:
- Prev:
RE: Problem building asyn R4-25 on Mac OSX Yosemite Mark Rivers
- Next:
Problems building EPICS base3.14.12.4 for i386 and armhf Florian Feldbauer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Installing CaLab "V.1.2.1.5" on SL6.1 L. C. De Silva
- Next:
Problem building asyn R4-25 on Mac OSX Yosemite Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
<2015>
2016
2017
2018
2019
2020
2021
2022
2023
2024
|