Upgrading the firmware on our Moxa NPort 5610-8 from 3.3 to 3.5 has apparently solved our problems - we have been running for almost a week now without ReplyTimeouts or similar errors.
Jon Jacky
On Fri, 31 Oct 2014, Mark Rivers wrote:
... I seem to recall past tech-talk messages that mentioned bad Moxa firmware?
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of [email protected]
Sent: Thursday, October 30, 2014 6:51 PM
To: [email protected]
Subject: Serial device server timeouts, overwhelmed by load?
We observe frequent StreamDevice ReplyTimeouts when communicating
through a Moxa serial device server. Details follow. We ask
whether this is expected (or can be mitigated) given our conditions.
We wonder whether we should use some other communication method
(USB to serial adaptors, for example).
Jon Jacky
... long story deleted ...
- References:
- RE: Serial device server timeouts, overwhelmed by load? Mark Rivers
- Navigate by Date:
- Prev:
Re: Polling CA client library in nonpreemptive mode at less than 10 Hz Andrew Johnson
- Next:
CA reference manual mystery function: ca_sg_pend J. Lewis Muir
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Serial device server timeouts, overwhelmed by load? Mark Rivers
- Next:
read waveform data using ca_create_subscription 吴煊
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|