Experimental Physics and
Industrial Control System

Hi Philip.

Sorry it took so long to answer. I have uploaded up-to-date versions for
cexp and gesys:

http://www.slac.stanford.edu/~strauman/rtems/cexp/cexp-2.2.2.tgz
http://www.slac.stanford.edu/~strauman/rtems/gesys/gesys-20140818.tgz

Note that gesys is built using gnu configure - follow the instructions in
the (updated) INSTALL.
Please let me know if you have any problems.

Best
- Till

On 08/13/2014 07:10 AM, Philip Taylor wrote:

I am trying to use RTEMS Cexp with RTEMS 4.10.2 running EPICS 3.14.12.4. I would
prefer to use the latest Cexp version 2.2. I have built Cexp but am facing various
build issues with the version of GeSys I have found.

Firstly, where is the latest GeSys source?
http://www.slac.stanford.edu/~strauman/rtems/software.html
just has a snapshot dated 2011/09/27.

The build issues when building GeSys include:
1. Tries to build target "rtemsbsp-install" for Cexp (no such target).
2. No rule to make GeSys target `o-optimize/libbspExt.nm', needed by `libnms'.

My GeSys INSTALL file mentions Cexp version 1.6 as well as obsolete rtemsNfs, so
there may well be build incompatibilities with the different subsystem versions.

Has anyone built GeSys using recent versions of RTEMS and Cexp?

BTW I am running RTEMS on a MVME6100 board (RTEMS "beatnik" BSP).

Thanks,


Philip Taylor


===============================================================================

Philip Taylor                       email : [email protected]
Observatory Sciences Ltd.           Web   : http://www.observatorysciences.co.uk
Brighton Media Centre               Phone : (UK)+(0)1223-655603
21-22 Old Steine                    Mobile : 07913-720806
BRIGHTON.
BN1 1EL
U.K.

===============================================================================

Replies:

Re: Building Cexp & GeSys with RTEMS 4.10.2 Michael Davidsaver

References:

Building Cexp & GeSys with RTEMS 4.10.2 Philip Taylor

Navigate by Date:

Prev: Future Minimum Requirements for IOCs Andrew Johnson

Next: Re: Building Cexp & GeSys with RTEMS 4.10.2 Michael Davidsaver

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Building Cexp & GeSys with RTEMS 4.10.2 Philip Taylor

Next: Re: Building Cexp & GeSys with RTEMS 4.10.2 Michael Davidsaver

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024