EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: EPICS_CA_MAX_ARRAY_BYTES for Pilatus
From: "Specht, Eliot D." <[email protected]>
To: "[email protected]" <[email protected]>
Date: Tue, 12 Aug 2014 16:22:17 +0000

I’m using areaDetector to run a Pilatus 2K with 198,209 pixels and 20-bit dynamic range. What value should I use for EPICS_CA_MAX_ARRAY_BYTES? That is, does each pixel use 4 bytes or 20 bits?

 

Eliot Specht                        

Oak Ridge National Laboratory      

 

 

Replies:
RE: EPICS_CA_MAX_ARRAY_BYTES for Pilatus Mark Rivers
Navigate by Date:
Prev: RE: New to EPICS - system design questions Mark Rivers
Next: RE: EPICS_CA_MAX_ARRAY_BYTES for Pilatus Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: yet another python extension to channel access Xiaoqiang Wang
Next: RE: EPICS_CA_MAX_ARRAY_BYTES for Pilatus Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 17 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·