On Wednesday 06 August 2014 11:25:04 Mark Rivers wrote:
> Does your application actually include an SNL program? If so, does
> your application dbd file include a line like the following:
>
> registrar(sncExampleRegistrar)
Right, you need at least one sequencer program and you must add a line
registrar(<name-of the-program>Registrar)
to your dbd for all programs you want to run on this IOC. With no such
line the iocShell does not even know anything about the 'seq' command,
nor any other of the sequencer's command line tools (seq, seqShow, etc).
This is because these tools are registered along with the actual program
in the same registration procedure.
Cheers
Ben
--
"Make it so they have to reboot after every typo." â Scott Adams
________________________________
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Prof. Dr. Dr. h.c. mult. Joachim Treusch, stv. Vorsitzende Dr. Beatrix Vierkorn-Rudolph
Geschäftsführung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
http://www.helmholtz-berlin.de
- References:
- st.cmd -- Line 30 -- Command seq not found. Azra Jabeen
- RE: st.cmd -- Line 30 -- Command seq not found. Mark Rivers
- Navigate by Date:
- Prev:
RE: st.cmd -- Line 30 -- Command seq not found. Mark Rivers
- Next:
RE: Sequencer 2.2.0 Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: st.cmd -- Line 30 -- Command seq not found. Mark Rivers
- Next:
Ai device supports: smoothing issue when receiving FP values Ralph Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|