Dear folks,
i have two questions regarding sscan record, maybe someone can help:
1) Is there anythig wrong with running a sscan record on one ioc on one
computer, reading data values from a sensor connected to this ioc, but
using positioners controlled by a second ioc on a second pc via
channelaccess ?
Or the other way round: does the sscan recond has to run on the same ioc
as the positioner controls ?
Somehow my positioners (controlled by second ioc) dont move at all if i
start the scan. Manual control of the positioners via caput works fine.
2) I can not dont find good documentation on how to save scan data (from
a 2-dim scan) to a file. Can anyone give me a simple receipe on how to
do this ? Do i need an extra module for this ?
Thanks a lot for any help !
Chrstian
- Replies:
- Re: sscan records Mi Qingru
- RE: sscan records Mooney, Tim M.
- Navigate by Date:
- Prev:
calc R3-4 Mooney, Tim M.
- Next:
Re: Problems using devSnmp from NSCL John A. Priller
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
calc R3-4 Mooney, Tim M.
- Next:
Re: sscan records Mi Qingru
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|