EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Re: sequencer installation
From: Vikram Bhagat <[email protected]>
To: Mark Rivers <[email protected]>, Ralph Lange <[email protected]>, EPICS Tech-Talk <[email protected]>
Date: Tue, 24 Jun 2014 14:02:14 -0700
Thank you Mark 




On Tuesday, June 24, 2014 9:29 PM, Mark Rivers <[email protected]> wrote:


> It is also not available on http://www.aps.anl.gov/epics.
 
If you go to the EPICS 3.14 Web site:
http://www.aps.anl.gov/epics/base/R3-14/index.php
 
and look at the bottom of the page it does contain a link to the current SNL Compiler/Sequencer:
http://www-csr.bessy.de/control/SoftDist/sequencer/
 
Mark
 
 
From: [email protected] [mailto:[email protected]] On Behalf Of Vikram Bhagat
Sent: Tuesday, June 24, 2014 2:23 PM
To: Ralph Lange; EPICS Tech-Talk
Subject: Re: sequencer installation
 
Hi Lange,
 Can you please indicate which version of sequencer is for 3.14.12.4?   The link  http://www.slac.stanford.edu/grp/cd/soft/epics/sequencer is not accessible.
 
 
Thanks
Vikram
 
On Sunday, June 22, 2014 11:52 AM, Ralph Lange <[email protected]> wrote:
 
On 22/06/2014 09:01, Vikram Bhagat wrote:
I am trying with 
seq-2.0.11.tar.gz

That is an old version of the sequencer. Its download page [1] very clearly shows the version of base it works with, in this case 3.14.8
Maintainership of the sequencer module has moved. Please use a recent version of the sequencer, available on its current home [2], which will compile and work without problems with a recent version of base. The EPICS web site [3] also points to the current home of the sequencer.

Cheers,
~Ralph

ps. Could someone at SLAC please put a prominent "outdated" note on the old sequencer page, with a link pointing to its current home? Thank you!

[1] http://www.slac.stanford.edu/grp/cd/soft/epics/sequencer
http://www.aps.anl.gov/epics/modules/soft.php
 
 


References:
sequencer installation Vikram Bhagat
RE: sequencer installation Mark Rivers
Re: sequencer installation Vikram Bhagat
RE: sequencer installation Mark Rivers
Re: sequencer installation Vikram Bhagat
RE: sequencer installation Mark Rivers
Re: sequencer installation Vikram Bhagat
Re: sequencer installation Ralph Lange
Re: sequencer installation Vikram Bhagat
Re: sequencer installation Ralph Lange
Re: sequencer installation Vikram Bhagat
RE: sequencer installation Mark Rivers
Navigate by Date:
Prev: RE: sequencer installation Mark Rivers
Next: RE: Huber Unichiller 012-MPC support module? ronaldo.mercado
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: sequencer installation Mark Rivers
Next: Re: sequencer installation Benjamin Franksen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <2014>  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 17 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·