Experimental Physics and
Industrial Control System

"Allison, Stephanie" <[email protected]> · Sun, 22 Jun 2014 18:58:52 -0700

Hi -

> ps. Could someone at SLAC please put a prominent "outdated" note on the old sequencer
> page, with a link pointing to its current home? Thank you!

I removed the page.

Stephanie

> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On Behalf
> Of Ralph Lange
> Sent: Sunday, June 22, 2014 2:52 AM
> To: EPICS Tech-Talk
> Subject: Re: sequencer installation
> 
> On 22/06/2014 09:01, Vikram Bhagat wrote:
> 
> 
> 	I am trying with
> 	seq-2.0.11.tar.gz
> 
> 
> 
> That is an old version of the sequencer. Its download page [1] very clearly shows the
> version of base it works with, in this case 3.14.8
> Maintainership of the sequencer module has moved. Please use a recent version of the
> sequencer, available on its current home [2], which will compile and work without
> problems with a recent version of base. The EPICS web site [3] also points to the current
> home of the sequencer.
> 
> Cheers,
> ~Ralph
> 
> ps. Could someone at SLAC please put a prominent "outdated" note on the old sequencer
> page, with a link pointing to its current home? Thank you!
> 
> [1] http://www.slac.stanford.edu/grp/cd/soft/epics/sequencer
> [2] http://www-csr.bessy.de/control/SoftDist/sequencer
> [3] http://www.aps.anl.gov/epics/modules/soft.php
> 

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System