Hi,
I've done some work on the lakeshore 336 and 350 controllers recently, so I've added a copy to github that people can use if they wish:
https://github.com/mp49/lakeshore/
This was based on work originally at Diamond, but it's been extended to include some support for the 350, 4 PID loop support, analog output control, ZONE support, 3062 option card support, and a set of CS-Studio BOY screens.
It should work with the 350 and 336 with at least firmware 2.1.
Cheers,
Matt
Data Acquisition and Control Engineer
Spallation Neutron Source
Oak Ridge National Lab
- Replies:
- device/driver support for NRM METROLAB PT2025 Jack
- Navigate by Date:
- Prev:
Re: Dependency issue with shared database templates unless using "make clean" Kasemir, Kay
- Next:
Fw: sequencer installation Vikram Bhagat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Dependency issue with shared database templates unless using "make clean" Benjamin Franksen
- Next:
device/driver support for NRM METROLAB PT2025 Jack
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|