EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: DC Power supplies with EPICS support
From: "Pearson, Matthew R." <[email protected]>
To: "[email protected]" <[email protected]>
Cc: "<[email protected]>" <[email protected]>
Date: Wed, 4 Jun 2014 13:56:08 +0000
Hi James,

We use a lot of Agilent rack mounted DC power supplies, such as:
http://www.home.agilent.com/en/pd-1655961-pn-N8735A/power-supply-30v-110a-3300w?&cc=US&lc=eng

They use an easy SCPI type protocol, ethernet bus. But also have RS232.

We also have TDK Lamda rack mountable supplies:
http://us.tdk-lambda.com/hp/

We're planning on standardizing on the Agilent models for our low voltage detector power supplies.

Cheers,
Matt


On Jun 4, 2014, at 4:39 AM, [email protected] wrote:

> Hello,
>  
> Does anyone have a any recommendations for an EPICS supported DC power supply to power a ceramic heater which requires current greater than 7A and voltage greater than 25V?  We are currently looking at a Sorensen 60-20E (which can supply 0-60V at 0-20A) which can be remotely controlled by RS232 or an analog input for ~£1,700.
>  
> Before I start writing support for this device, are there any other power supplies, with support already written, which would do the job for a similar cost?
>  
> Thanks,
>  
> James
> Diamond Light Source
> 
>  
> -- 
> 
> This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
> Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
> Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
> Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
>  
> 
> 
> 



References:
DC Power supplies with EPICS support James.OHea

Navigate by Date:
Prev: Re: DC Power supplies with EPICS support Rod Nussbaumer
Next: EDM 64-bit bug Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: DC Power supplies with EPICS support Mazanec Tomáš
Next: EDM 64-bit bug Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 17 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·