Experimental Physics and
| |||||||||||||||
|
The detector of our beamline is MarCCD and the type is SX165. It worked in areaDetectorR1-9-1 Module correctly. The parameters were as follows: ADFrameType = DblCorrelation; ADImageMode = Single; marCCDStability = 0; marCCDOverlap = Sequential; In this condition, I found it can't stop acquire completely when it was acquiring. It can only stop front half acquire time and the back time can't stopped. For example, if I set the acquire time = 100s, then I clicked the start button to start acquire. If I want to stop acquire when it had acquired 20s for front half the nominal acquisition time, I clicked the stop button to stop it. And then I found it still acquired in the next half the nominal acquisition time which was 50s. It couldn't be stopped completely! If I set ADFrameType to Normal, it could be stopped quickly. But the background noise was too large in this mode so I set ADFrameType to DblCorrelation for use. Is there a way to solve this problem? Thanks! With best regards, ------------------ Zhou Ping SAXS Beamline, SINAP, Chinese Academy of Sciences Address:239 ZhangHeng Road,Pudong District,Shanghai,201203,P.R.China Tel:86-21-33932019 Mobile: 86-18116357596 Email:[email protected]
| ||||||||||||||
ANJ, 17 Dec 2015 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing · |