EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: asyn/areaDetector: minimize number of warning messages
From: Mark Rivers <[email protected]>
To: "'Piccoli, Luciano'" <[email protected]>, "[email protected]" <[email protected]>
Date: Mon, 7 Apr 2014 18:11:06 +0000
Yes, there are several ways to do that.

- Set the SCAN rate of the record that is polling the memory pool statistics to Passive.  This record is "$(P)$(R)PoolUsedMem".
  caput PROF:LI20:3501:PoolUsedMem.SCAN "Passive"

or

- Set the asynTraceMask of the Ethernet camera to 0.
  asynSetTraceMask("PS3500",0,0)

Mark


-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Piccoli, Luciano
Sent: Monday, April 07, 2014 1:04 PM
To: [email protected]
Subject: asyn/areaDetector: minimize number of warning messages


Hi All,

I have an areaDetector based SIOC that has reads out several Ethernet cameras.
Many times some of the cameras are powered down, causing messages like these to be periodically printed out.

	2014/04/07 10:59:22.767 PROF:LI20:3500:PoolAllocBuffers devAsynInt32 queueRequest port PS3500 not connected
	2014/04/07 10:59:22.767 PROF:LI20:3500:PoolFreeBuffers devAsynInt32 queueRequest port PS3500 not connected
	2014/04/07 10:59:22.767 PROF:LI20:3501:PoolUsedMem devAsynFloat64 queueRequest port PS3501 not connected
	2014/04/07 10:59:22.767 PROF:LI20:3501:PoolAllocBuffers devAsynInt32 queueRequest port PS3501 not connected
	2014/04/07 10:59:22.767 PROF:LI20:3501:PoolFreeBuffers devAsynInt32 queueRequest port PS3501 not connected
	2014/04/07 10:59:23.768 PROF:LI20:3300:PoolUsedMem devAsynFloat64 queueRequest port PS3300 not connected
	2014/04/07 10:59:23.768 PROF:LI20:3300:PoolAllocBuffers devAsynInt32 queueRequest port PS3300 not connected

Is there a way to temporarily minimize or disable the messages?

Thanks,
-Luciano



References:
asyn/areaDetector: minimize number of warning messages Piccoli, Luciano

Navigate by Date:
Prev: asyn/areaDetector: minimize number of warning messages Piccoli, Luciano
Next: autosave 5.3 Mooney, Tim M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: asyn/areaDetector: minimize number of warning messages Piccoli, Luciano
Next: autosave 5.3 Mooney, Tim M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  <20142015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 17 Dec 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·