Subject: |
Problem with generating and installing OS specific header |
From: |
Benjamin Franksen <[email protected]> |
To: |
<[email protected]> |
Date: |
Wed, 12 Mar 2014 15:41:07 +0100 |
This is a question about the EPICS build system. I am doing this:
INC_vxWorks += bla.h
bla.h:
touch bla.h
in a Makefile (boring stuff deleted).
When I run make I get
make[2]: *** No rule to make target `../O.Common/bla.h', needed by
`inc'. Stop.
make[1]: *** [install.vxWorks-68040] Error 2
make: *** [bugApp.install] Error 2
I don't understand this. Why does the build system need
../O.Common/bla.h? bla.h is supposed to be OS-specific
I attached the complete TOP that reproduces this.
Cheers
Ben
--
"Make it so they have to reboot after every typo." ― Scott Adams
Attachment:
inc-bug.tar.gz
Description: application/compressed-tar
Attachment:
signature.asc
Description: This is a digitally signed message part.
- Replies:
- Re: Problem with generating and installing OS specific header Benjamin Franksen
- Re: Problem with generating and installing OS specific header Andrew Johnson
- Navigate by Date:
- Prev:
Re: Using a Waveform record (char type representing a String) as input to an aSub record Benjamin Franksen
- Next:
Re: Problem with generating and installing OS specific header Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
PCaPAC Abstract Deadline Elder Matias
- Next:
Re: Problem with generating and installing OS specific header Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|