Dear All,
Sequencer in one IOC, is not able to monitor, PV from another IOC on the same network. However these PVs are accessible by caget and camonitor on both machines.
____Here is what I am doing.____________________________________________________
Machine 1, IOC1.
DB_1.db has
record(waveform, "CMD_FIELD") { field(DESC, "command") field(NELM, 16000) field(FTVL, CHAR) }
SEQ1.stt Updated above PV successfully. -----------------------------------------------------------
Machine 2 IOC2
SEQ2.stt has
char CMD_[16000]; assign CMD to "CMD_FIELD"; monitor CMD; evflag cmdDFlag; sync CMD cmdDFlag;
But not able to access the PV. It works only when I am creating this PV in IOC2.
Please help.
Thanks and Regards
Ganesh
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
- Replies:
- Re: Sequencer is not monitoring Pvs from another IOC Benjamin Franksen
- Re: Sequencer is not monitoring Pvs from another IOC Ganesh Jangir
- Navigate by Date:
- Prev:
Re: CSS BEAST alarm hierarchy Kasemir, Kay
- Next:
Re: Sequencer is not monitoring Pvs from another IOC Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: CSS BEAST alarm hierarchy Xinyu.Wu
- Next:
Re: Sequencer is not monitoring Pvs from another IOC Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
<2014>
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|