Experimental Physics and
Industrial Control System

Hi,

 

I have a GigE camera GC655 and Area Detector IOC running on Debian. At its standard configuration 659X493 camera can perform at 90 fps. And I am achieving this through epics IOC.

 

This camera has another mode. When you reduce the area to 320x240 it is performing at 164 fps. The AVT screen shot is attached. Many cameras have this mode.

 

How I can change/set max size in epics IOC to 320x240 to achieve this performance?

Perhaps someone has already done this.

 

I have tried changing it through AVT software, assigning new configuration to different ConfigFileIdexes, however, every time I start IOC, it resets it to default max size. Size is _RBV record only.

 

Thank you,

Oksana