Subject: |
EPICS support for USB TMC (Test & Measurement Class) devices -- Release 1.0 |
From: |
Eric Norum <[email protected]> |
To: |
EPICS Tech Talk <[email protected]> |
Date: |
Wed, 30 Oct 2013 10:14:53 -0700 |
The first production release of the ASYN USB TMC support module is available for downloads.
This support module provides an asynOctet port that communicates with USB devices that implement the USB TMC (Test and Measurement Class) protocol. The support module uses the libusb-1.0 library and as such requires no special privileges or kernel drivers and should work across all platforms that support libusb-1.0.
http://sourceforge.net/p/epics/wiki/ASYN%20USB%20TMC%20Support/
The driver has been tested on Linux and OS X with assorted devices including an oscilloscope, a signal generator, a power meter and a magnetometer.
--
Eric Norum
[email protected]
- Replies:
- Re: EPICS support for USB TMC (Test & Measurement Class) devices -- Release 1.0 Noboru Yamamoto
- Navigate by Date:
- Prev:
RE: merge multiple alarms Mooney, Tim M.
- Next:
Re: EPICS support for USB TMC (Test & Measurement Class) devices -- Release 1.0 Noboru Yamamoto
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
GTR: thread-safety issue with devGtr.c Till Straumann
- Next:
Re: EPICS support for USB TMC (Test & Measurement Class) devices -- Release 1.0 Noboru Yamamoto
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|