Hi Mark,
> Event flags are very useful for detecting changes that may be too
> quick to catch by looking at the value.
I looked into them as well but the sequencer documentation says:
"Neither testing the value of a monitored channel in a when clause nor
associating the channel with an event flag and then testing the event
flag can guarantee that the sequence is aware of all monitors posted on
the channel."
But going through the documentation again revealed that this issue can
be fixed using queuing monitors:
http://www-csr.bessy.de/control/SoftDist/sequencer/Tutorial.html#queuing-monitors
However the easiest way seems to be using asychronous pvPuts together
with pvPutComplete. Unfortunately all these solutions require an
additional state. But I think I can live with that...
Thank you!
Martin
- Replies:
- Re: seq and synchronous writes Benjamin Franksen
- References:
- seq and synchronous writes Konrad, Martin
- Re: seq and synchronous writes Konrad, Martin
- Navigate by Date:
- Prev:
RE: seq and synchronous writes Mark Rivers
- Next:
RE: seq and synchronous writes Mooney, Tim M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: seq and synchronous writes Mark Rivers
- Next:
Re: seq and synchronous writes Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|