Actually, upon further reading I don't think the EL1262 can do what we want so forget about that.
Thanks,
Damien
> -----Original Message-----
> From: [email protected] [mailto:tech-talk-
> [email protected]] On Behalf Of LYNCH, Damien
> Sent: Thursday, 29 August 2013 9:25 AM
> To: [email protected]
> Subject: EhterCAT terminals [SEC=UNOFFICIAL]
>
> Hi,
>
> Am I right in assuming that we would not have to write any code to use
> EtherCAT terminals that are not already in use at other labs? It looks like the
> important thing is to get the ESI files from the vendor. I notice there are two
> Python scripts (expandChain.py and maketemplate.py) that are needed to
> produce the scanner XML configuration file and the database template files
> for each terminal type. I could not see them in the DLS EtherCAT package.
> Where do they come from?
>
> On another note, we need a 1 MHz counter and are thinking the EL1262 XFC
> terminal could do the job. The scanTest example IOC uses a XFC terminal but
> I wanted to double check that there should be no problem using an XFC
> terminal.
>
> Thanks,
> Damien
- Replies:
- RE: EhterCAT terminals [SEC=UNOFFICIAL] nick.rees
- References:
- EhterCAT terminals [SEC=UNOFFICIAL] LYNCH, Damien
- Navigate by Date:
- Prev:
RE: TPG261 : "message too small=0" for EPICS Mark Rivers
- Next:
RE: EhterCAT terminals [SEC=UNOFFICIAL] nick.rees
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EhterCAT terminals [SEC=UNOFFICIAL] LYNCH, Damien
- Next:
RE: EhterCAT terminals [SEC=UNOFFICIAL] nick.rees
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|