On 07/11/2013 02:32 PM, Jane Richards wrote:
Hi,
I saw a tech-talk posting about this in January 2012 but do not see
it in the Hardware Support list. Does anyone have a driver available? I
will use it for a Linux ioc but can adapt software written for other OS.
Thanks,
Jane
An epics driver for this device was written for NSLS2. However, it was
written for RTEMS using OS specific DMA operations. It would take some
effort to port this to Linux, and without a complete re-write it would
be difficult to take advantage of DMA (IMO a must for a waveform ADC).
If you would like I can send the source to you (actually I should really
post it for all).
Michael
- References:
- Looking for STRUCK SIS3302 device driver Jane Richards
- Navigate by Date:
- Prev:
Re: EPICS fsmRecord question Michael Davidsaver
- Next:
RE: asyn+streamDevice hangs with synchronousLock:Yes Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Looking for STRUCK SIS3302 device driver Jane Richards
- Next:
Newport CONEX-LDS Electronic Autocollimator Kevin Peterson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|