You need to do 1 of 2 things:
1) Comment out the line like the following uin asyn/configure/RELEASE
SNCSEQ=$(SUPPORT)/seq-2-1-10
or
2) Build the EPICS “seq” module and set the SNCSEQ line in RELEASE to point to it.
Mark
Dear All,
I am facing problem when installing asyn 4-19 with base 3.14.12.2 error is
shown below. Please help me.
make[3]: *** No rule to make target `ipSNCServer.o', needed by `libtestIPServerSupport.a'. Stop.
make[3]: Leaving directory `/home/jenamani/epics/modbus/asyn4-19/testIPServerApp/src/O.linux-x86_64'
make[2]: *** [install.linux-x86_64] Error 2
make[2]: Leaving directory `/home/jenamani/epics/modbus/asyn4-19/testIPServerApp/src'
make[1]: *** [src.install] Error 2
make[1]: Leaving directory `/home/jenamani/epics/modbus/asyn4-19/testIPServerApp'
make: *** [testIPServerApp.install] Error 2
Priyabrata Jenamani