Hi Yasemin,
Looking at it, macLib is case sensitive so macros like PORT are case sensitive. So:
dbLoadRecords("/opt/epics/modules/soft/asyn4-20/db/asynRecord.db","P=yasemin:,R=asyn,Port=L0,ADDR=24,IMAX=100,OMAX=100")
macLib: macro PORT is undefined (expanding string field(PORT,"$(PORT)"))
has "Port" defined as a macro and so "PORT" is undefined.
Nick Rees
Principal Software Engineer Phone: +44 (0)1235-778430
Diamond Light Source Fax: +44 (0)1235-446713
From: [email protected] [mailto:[email protected]] On Behalf Of Yasemin Barutçu
Sent: 10 April 2013 08:56
To: [email protected]
Subject: macLib: macro PORT is undefined
Hello,
I have a problem when start ioc.
O.S. : Scientific Linux
Base Vers : 3.14.12.3
I've been gettin following error when I start IOC.
cd /opt/Epics-Ex/burakCihaz
## Register all support components
dbLoadDatabase "dbd/burakCihaz.dbd"
burakCihaz_registerRecordDeviceDriver pdbbase
##Configure devices
drvAsynSerialPortConfigure("L0","/dev/ttyS0",0,0,0)
asynSetOption("L0",-1,"baud","9600")
asynSetOption("L0",-1,"bits","8")
asynSetOption("L0",-1,"parity","none")
asynSetOption("L0",-1,"stop","1")
asynSetOption("L0",-1,"clocal","Y")
asynSetOption("L0",-1,"crtscts","N")
dbLoadRecords("/opt/epics/modules/soft/asyn4-20/db/asynRecord.db","P=yasemin:,R=asyn,Port=L0,ADDR=24,IMAX=100,OMAX=100")
macLib: macro PORT is undefined (expanding string field(PORT,"$(PORT)")
)
filename="../dbLexRoutines.c" line number=319
macExpandString failed for file /opt/epics/modules/soft/asyn4-20/db/asynRecord.db
yasemin:asyn.PORT Has unexpanded macro
Can't set "yasemin:asyn.PORT" to "$(PORT,undefined)"
Error at or before ")" in file "/opt/epics/modules/soft/asyn4-20/db/asynRecord.db" line 4
## Load record instances
#dbLoadRecords("db/xxx.db","user=rootHost")
cd /opt/Epics-Ex/burakCihaz/iocBoot/iocburakCihaz
iocInit
Starting iocInit
############################################################################
## EPICS R3.14.12.3 $Date: Mon 2012-12-17 14:11:47 -0600$
## EPICS Base built Mar 28 2013
############################################################################
iocRun: All initialization complete
## Start any sequence programs
#seq sncxxx,"user=rootHost"
epics> ^C
[root@localhost iocburakCihaz]# vi st.cmd
[root@localhost iocburakCihaz]# ../../bin/linux-x86_64/burakCihaz st.cmd
#!../../bin/linux-x86_64/burakCihaz
## You may have to change burakCihaz to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("ARCH","linux-x86_64")
epicsEnvSet("IOC","iocburakCihaz")
epicsEnvSet("TOP","/opt/Epics-Ex/burakCihaz")
epicsEnvSet("EPICS_BASE","/opt/epics/base-3.14.12.3")
epicsEnvSet("ASYN","/opt/epics/modules/soft/asyn4-20")
cd /opt/Epics-Ex/burakCihaz
## Register all support components
dbLoadDatabase "dbd/burakCihaz.dbd"
burakCihaz_registerRecordDeviceDriver pdbbase
##Configure devices
drvAsynSerialPortConfigure("L0","/dev/ttyS0",0,0,0)
asynSetOption("L0",-1,"baud","9600")
asynSetOption("L0",-1,"bits","8")
asynSetOption("L0",-1,"parity","none")
asynSetOption("L0",-1,"stop","1")
asynSetOption("L0",-1,"clocal","Y")
asynSetOption("L0",-1,"crtscts","N")
dbLoadRecords("/opt/epics/modules/soft/asyn4-20/db/asynRecord.db","P=yasemin:,R=asyn,Port=L0,ADDR=24,IMAX=100,OMAX=100")
macLib: macro PORT is undefined (expanding string field(PORT,"$(PORT)")
)
filename="../dbLexRoutines.c" line number=319
macExpandString failed for file /opt/epics/modules/soft/asyn4-20/db/asynRecord.db
yasemin:asyn.PORT Has unexpanded macro
Can't set "yasemin:asyn.PORT" to "$(PORT,undefined)"
Error at or before ")" in file "/opt/epics/modules/soft/asyn4-20/db/asynRecord.db" line 4
## Load record instances
#dbLoadRecords("db/xxx.db","user=rootHost")
cd /opt/Epics-Ex/burakCihaz/iocBoot/iocburakCihaz
iocInit
Starting iocInit
############################################################################
## EPICS R3.14.12.3 $Date: Mon 2012-12-17 14:11:47 -0600$
## EPICS Base built Mar 28 2013
############################################################################
iocRun: All initialization complete
## Start any sequence programs
#seq sncxxx,"user=rootHost"
epics>
--
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
- References:
- macLib: macro PORT is undefined Yasemin Barutçu
- Navigate by Date:
- Prev:
Re: macLib: macro PORT is undefined Hinko Kocevar
- Next:
RE: linux file search from Asyn nick.rees
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: macLib: macro PORT is undefined Hinko Kocevar
- Next:
Re: macLib: macro PORT is undefined Alan Greer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·