Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: Problem when cross-compiling epics base for vxWorks5.5 on win32-x86
From:	"J. Lewis Muir" <[email protected]>
To:	[email protected]
Date:	Mon, 25 Feb 2013 09:37:45 -0600

On 2/25/13 8:51 AM, Dirk Zimoch wrote:
> Do we really need cap5 in EPICS base? I would like to see it in a
> separate module.

+1

Lewis

References:: Problem when cross-compiling epics base for vxWorks5.5 on win32-x86 王林; Re: Problem when cross-compiling epics base for vxWorks5.5 on win32-x86 Andrew Johnson; Re: Problem when cross-compiling epics base for vxWorks5.5 on win32-x86 Dirk Zimoch

Navigate by Date:: Prev: Re: Problem when cross-compiling epics base for vxWorks5.5 on win32-x86 Dirk Zimoch; Next: Re: Problem when loading epics3.14.12.1 application tovxWorks5.5/MPC8572 王林; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: Problem when cross-compiling epics base for vxWorks5.5 on win32-x86 Dirk Zimoch; Next: Re: Problem when cross-compiling epics base for vxWorks5.5 on win32-x86 Andrew Johnson; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 <2013> 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 20 Apr 2015