EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: asyn and snmp
From: Paul Nord <[email protected]>
To: James F Ross <[email protected]>
Cc: Eric Norum <[email protected]>, EPICS Tech Talk <[email protected]>
Date: Thu, 21 Feb 2013 14:38:54 -0600
James,

Try taking that line out.  MIBDIRS should be defined elsewhere.  Or, make sure that it is.

Paul


On Feb 21, 2013, at 2:10 PM, James F Ross <[email protected]> wrote:

> I dont think it's an issue with the environment variable.  I tried
> commenting them out and it gave the same syntax error about the
> dbLoadDatabase command.
> 
> The IOC isn't getting far enough to get to the console output.  Here
> is what I do after building it:
> 1. cd <TOP>/iocBoot/iocsnmp
> 2. ./st.cmd
> 
> Output:
> ./st.cmd: line 7: syntax error near unexpected token `"MIBDIRS",'
> ./st.cmd: line 7: `epicsEnvSet("MIBDIRS", "+$(TOP)/mibs")'
> 
> I'm running scientific linux 5.8 with epics base 3.14.12.1.
> Thanks
> James
> 
> 
> On Thu, Feb 21, 2013 at 2:56 PM, Eric Norum <[email protected]> wrote:
>> That's strange.  Can you send all the IOC console output?
>> What IOC platform are you using?
>> I tried downloading, unpacking and building the SNMP tarball.  When I run it I get:
>> 
>> 
>> #!../../bin/darwin-x86/wienerCrateExample
>> ###############################################################################
>> # Set up environment
>> # Need to add run-time expansion for crate support
>> epicsEnvSet("P","wienerCrate:")
>> epicsEnvSet("R","1:")
>> < envPaths
>> epicsEnvSet("ARCH","darwin-x86")
>> epicsEnvSet("IOC","iocwienerCrateExample")
>> epicsEnvSet("TOP","/Users/wenorum/src/SNMP/snmp/WienerCrate")
>> epicsEnvSet("SNMP","/Users/wenorum/src/SNMP/snmp")
>> epicsEnvSet("EPICS_BASE","/usr/local/epics/R3.14.12/base")
>> epicsEnvSet("MIBDIRS", "+/Users/wenorum/src/SNMP/snmp/WienerCrate/mibs")
>> epicsEnvSet("WCR_PREF", "admin WIENER-CRATE-MIB::")
>> ###############################################################################
>> # Register all support components
>> …….
>> 
>> 
>> On Feb 21, 2013, at 11:42 AM, James F Ross <[email protected]> wrote:
>> 
>>> Paul,
>>> 
>>> Ok, I'm starting from scratch with John's basic IOC and I'm going to
>>> write a very basic IOC just to turn the crate on and off and maybe
>>> read the voltages and currents.
>>> 
>>> At the moment i'm trying to get the basic IOC to run, though, and am
>>> running into the following problem.  I've emailed john but if you have
>>> any insight, that'd be nice as well:
>>> 
>>> ./st.cmd
>>> ./st.cmd: line 7: syntax error near unexpected token `"MIBDIRS",'
>>> ./st.cmd: line 7: `epicsEnvSet("MIBDIRS", "+$(TOP)/mibs")'
>>> 
>>> The mib file is in that directory, so I'm not sure what it is
>>> complaining about.  This is written into his st.cmd file, I didn't
>>> change anything.
>>> James
>> 
>> --
>> Eric Norum
>> [email protected]
>> 



References:
asyn and snmp James F Ross
Re: asyn and snmp Paul Nord
Re: asyn and snmp James F Ross
Re: asyn and snmp Eric Norum
Re: asyn and snmp James F Ross

Navigate by Date:
Prev: Re: asyn and snmp James F Ross
Next: Re: asyn and snmp Eric Norum
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: asyn and snmp James F Ross
Next: Re: asyn and snmp Eric Norum
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 20 Apr 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·