I've added an areaDetector based support module for the Xspress 3 system on the Diamond download page. The Xspress 3 is a readout system for energy resolving x-ray detectors, such as the Vortex. The support module provides:
* Spectra readout (dead time corrected or un-corrected)
* Hardware scaler readout
* 16 regions of interest (ROIs) per channel
* HDF5 file saving of spectra, scalers, ROIs (and ROI limits), deadtime correction factors
* Visualization of spectra, scalers and ROIs
* EDM screens
* Example IOC
* Example python client script, using DLS cothread
The software makes use of an API developed by STFC to control the Xspress 3 and readout data. Quantum Detectors will normally provide the system with the API and an Epics IOC, along with a suitable readout PC.
It's possible Diamond could have quite a few Xspress 3 systems, so it's likely there'll be updates to this support module in the future.
The support module dependency can be found in the RELEASE file. The example IOC also requires the boost C++ libraries (1-48 or later), and the spectraPlugins support module (also on the DLS download page).
Dr Matthew Pearson
Senior Software Systems Engineer
Diamond Light Source
MX Controls Team Leader
Beamline Controls - I19, I24, B24
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
- Navigate by Date:
Re: [CSS] the tab widget's active tab Pavel Maslov
Re: Problem with mca R7.2 and Rontec XFlash Zachary Brown
- Navigate by Thread:
Re: Portable Channel Access C++ Andrew Johnson
header files in snc code Pierrick Hanlet